POWER REQUIREMENTS
Voltage : 8.0 to 15 Volts DC
Current : 2.25 A max (depends on load)
Power : 27 W max (depends on load)
.
INPUT CONNECTIONS
Red (+) and black (-) leads, approximately 14 inches
long.
.
BRIGHTNESS CONTROL (basic)
Screwdriver adjustable from zero to maximum. Power
consumption is reduced
in proportion to brightness reduction.
BRIGHTNESS CONTROL (optional)
Orange control lead is provided for connection to an
electronic controller
to control the neon brightness.
Minimum brightness voltage : 0.80 V
Maximum brightness voltage : 3.60 V
Control current : 50uA maximum
Absolute max. control voltage : 15 V
.
OUTPUT CHARACTERISTICS
Output is isolated from input for maximum safety and
flexibility of
application.
Open or shorted output will not damage
the unit.
Voltage : 5000 VAC max. (actual voltage depends on load
and
will be
equal to or lower than this value.
Current : 20 mA |
OUTPUT CONNECTIONS
GTO type high voltage leads
.
DIMENSIONS
2.10 x 1.38 x 0.75 inches (100 x 35 x 19 mm)
.
MOUNTING
Unit is mounted with two 8-32 x 3/4 inch screws.
FOOTAGE CHART
|
8 mm
|
9 mm
|
10mm
|
12mm
|
15mm
|
|
Neon
|
6 ft
|
7 ft
|
11 ft
|
13 ft
|
16 ft
|
|
Argon
|
8 ft
|
10 ft
|
13 ft
|
17 ft
|
18 ft
|
Maximum footage is shown, no minimum limit exists.
Footage
includes
one pair of electrodes. Deduct one foot only for each additional pair.
WARNING
This device produces high voltage at high frequency and
can
create potential
danger
if not applied and installed properly. |
